User Access-Control Ip-Based - TP-Link T2500G-10TS Cli Reference Manual

the the settings of different functions. "user" means that you can only view
some of the the settings of different functions without the right to edit or
modify. It is "admin" by default.
0 —— Specify the encryption type. 0 indicates that an unencrypted password
will follow. By default, the encryption type is 0.
password
characters or symbols. The password is case sensitive, allows digits, English
letters (case sensitive), underlines and sixteen special characters
( !$%'()*,-./[]{|} ). The password will be saved to the configuration file using the
MD5 encrypted algorithm.
5 —— Indicates an MD5 encrypted password with fixed length will follow.
encrypted-password
which you can copy from another switch's configuration file.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
If both the user name (password) and user name (secret) are defined, only
the latest configured password will take effect.
Example
Add and enable a new admin user named "tplink", of which the password is
"admin". The password will be displayed in the encrypted form.
T2500G-10TS(config)#user name tplink privilege admin secret 0 admin
11.3

user access-control ip-based

Description
The user access-control ip-based command is used to limit the IP-range of
the users for login. Only the users within the IP-range you set here are
allowed to login. To cancel the user access limit, please use no user
access-control command.
——Users' login password, a string from 1 to 31 alphanumeric
—— An MD5 encrypted password with fixed length,
73