Enable Admin Secret - TP-Link T2500G-10TS Cli Reference Manual

User Guidelines
If the password you configured here is unencrypted and the global
encryption function is enabled in
password in the configuration file will be displayed in the symmetric
encrypted form.
Example
Set the elevation password as 123 for the current logged-in user to gain
administrator level privileges:
T2500G-10TS(config)#enable admin password 0 123
35.3

enable admin secret

Description
The enable admin secret command is used to elevate the current logged-in
user from guest to admin and gain administrator level privileges. The
authentication password is possibly authenticated in RADIUS/TACACS+
servers, user-defined server groups or local on the switch.
To remove the password, please use no enable admin secret command.
This command uses the MD5 encryption.
Syntax
enable secret { [ 0 ]
no enable secret
Parameter
0 —— Specify the encryption type. 0 indicates that an unencrypted password
will follow. By default, the encryption type is 0.
password
characters or symbols. The password is case sensitive, allows digits, English
letters (case sensitive), underlines and sixteen special characters
( !$%'()*,-./[]{|} ). By default, it is empty. The password in the configuration file
will be displayed in the MD5 encrypted form.
5 —— Indicates an MD5 encrypted password with fixed length will follow.
encrypted-password
which you can copy from another switch's configuration file. After the
encrypted password is configured, you should use the corresponding
unencrypted password to elevate the priviledge.
password
| 5
—— Super password, a string from 1 to 31 alphanumeric
—— An MD5 encrypted password with fixed length,
324
service password-encryption, the
encrypted-password
}