Configure; Exit - TP-Link T2500G-10TS Cli Reference Manual

User Guidelines
If both the enable password and enable secret are defined, you must enter
the password set in enable secret.
Example
Set the secret password as "admin" and unencrypted to access Privileged
EXEC Mode from User EXEC Mode. The password will be displayed in the
encrypted form.
T2500G-10TS(config)#enable secret 0 admin
2.6

configure

Description
The configure command is used to access Global Configuration Mode from
Privileged EXEC Mode.
Syntax
configure
Command Mode
Privileged EXEC Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Access Global Configuration Mode from Privileged EXEC Mode:
T2500G-10TS# configure
T2500G-10TS(config)#
2.7

exit

Description
The exit command is used to return to the previous Mode from the current
Mode.
Syntax
exit
24