Periodic - TP-Link T2500G-10TS Cli Reference Manual

Syntax
absolute start
no absolute
Parameter
start-date
MM/DD/YYYY. By default, it is 01/01/1970.
end-date
MM/DD/YYYY. By default, it is 12/31/2099. The Absoluteness Mode will be
disabled if the start date and end date are both in default value.
Command Mode
Time-range Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the time-range tSeg1 with time from May 5, 2012 to Oct. 5, 2012:
T2500G-10TS(config)# time-range tSeg1
T2500G-10TS(config-time-range)# absolute start 05/05/2012 end
10/05/2012
28.3

periodic

Description
The periodic command is used to configure the time-range into periodic
mode. To delete the corresponding Periodic Mode time-range, please use no
periodic command. To delete the corresponding Periodic Mode week-date
time-range, please use no periodic week-date command. To delete the
corresponding Periodic Mode time-slice time-range, please use no periodic
time-slice command.
Syntax
periodic [week-date
time-slice
no periodic
no periodic week-date
no periodic time-slice
start-date end-date
end
—— The start date in Absoluteness Mode, in the format of
—— The end date in Absoluteness Mode, in the format of
week-day
time-slice
] [time-slice3
209
time-slice
] [time-slice1
time-slice
] [time-slice4
] [time-slice2
]