Installation; Mounting A Module On A Din Rail - Mitsubishi Electric NZ2GF-CCB User Manual

6.3

Installation

6.3.1

Mounting a module on a DIN rail

An example of the use of the DIN rail stopper is described in the following procedure. Fix the module according to the
manual of the DIN rail stopper used.
(1) Mounting procedure
This section describes how to mount the bridge module on a DIN rail.
Hitch the hook to
bottom of the DIN rail
1.
Hitch the upper hook of the module to the top of the
DIN rail.
2.
Push in the DIN rail hook of the module until it
clicks.
3.
Loosen the screw on the DIN rail stopper.
Hook
Hook
4.
Hitch the bottom hook of the DIN rail stopper to the
bottom of the DIN rail.
Hitch the hook according to the orientation of the arrow
on the front of the stopper.
CHAPTER 6 INSTALLATION AND WIRING
6
41