HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference page 185

v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
group-name: Specifies an SNMP group name, a case-sensitive string of 1 to 32 characters.
authentication: Specifies the authentication without privacy security model for the SNMPv3 group.
privacy: Specifies the authentication with privacy security model for the SNMPv3 group.
read-view view-name: Specifies a read-only MIB view. The view-name represents a MIB view name,
a case-sensitive string of 1 to 32 characters. If you do not specify a read-only MIB view, the SNMP
group has read access to the default view ViewDefault.
write-view view-name: Specifies a read and write MIB view. The view-name represents a MIB view
name, a case-sensitive string of 1 to 32 characters. If you do not specify a read and write view, the
SNMP group cannot set any MIB object on the SNMP agent.
notify-view view-name: Specifies a notify MIB view. The view-name represents a MIB view name, a
case-sensitive string of 1 to 32 characters. The SNMP agent sends notifications to the users in the
specified group only for the MIB objects included in the notify view. If you do not specify a notify view,
the SNMP agent does not send any notification to the users in the specified group.
acl: Specifies a basic or advanced IPv4 ACL for the group.
ipv4-acl-number: Specifies a basic or advanced IPv4 ACL by its number. The basic IPv4 ACL
number is in the range of 2000 to 2999. The advanced IPv4 ACL number is in the range of 3000 to
3999.
name ipv4-acl-name: Specifies a basic or advanced IPv4 ACL by its name, a case-insensitive string
of 1 to 63 characters.
acl ipv6: Specifies a basic or advanced IPv6 ACL for the group.
ipv6-acl-number: Specifies a basic or advanced IPv6 ACL by its number. The basic IPv6 ACL
number is in the range of 2000 to 2999. The advanced IPv6 ACL number is in the range of 3000 to
3999.
name ipv6-acl-name: Specifies a basic or advanced IPv6 ACL by its name, a case-insensitive string
of 1 to 63 characters.
Usage guidelines
SNMPv1 and SNMPv2c settings in this command are not supported in FIPS mode.
Only users with the network-admin or level-15 user role can execute this command. Users with other
user roles cannot execute this command even if these roles are granted access to commands of the
SNMP feature or this command.
All users in an SNMP group share the security model and access rights of the group.
You can create a maximum of 20 SNMP groups, including SNMPv1, SNMPv2c, and SNMPv3
groups.
All SNMPv3 users in a group share the same security model, but can use different authentication
and encryption key settings. To implement a security model for a user and avoid SNMP
communication failures, make sure the security model configuration for the group and the security
key settings for the user are compliant with
Table 42 Basic security setting requirements for different security models
Security model
Authentication with
privacy
Table 42
Security model
keyword for the
group
privacy
176
and match the settings on the NMS.
Security key
settings for the
user
Authentication key,
encryption key
Remarks
If the authentication key
or the encryption key is
not configured, SNMP
communication will fail.