HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference page 210

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, the command displays history samples for all interfaces that have an RMON history
control entry.
Usage guidelines
RMON uses the etherHistoryTable object to store the history samples of Ethernet statistics for
Ethernet interfaces.
To collect history samples for an Ethernet interface, you must first create a history control entry on
the interface.
To configure the number of history samples that can be displayed and the history sampling interval,
use the rmon history command.
Examples
# Display the RMON history control entry and history samples for GigabitEthernet 1/0/1.
<Sysname> display rmon history gigabitethernet 1/0/1
HistoryControlEntry 6 owned by user1 is VALID.
Sampled interface
Sampling interval
Sampling record 1 :
dropevents
packets
multicast packets : 23
undersize packets : 0
fragments
collisions
Table 47 Command output
Field
HistoryControlEntry
entry-number owned by
owner is status.
Sampled Interface
Sampling interval
: GigabitEthernet1/0/1<ifIndex.117>
: 8(sec) with 3 buckets max
: 0 , octets
: 54 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
Description
Status and owner of the history control entry:
• entry-number—History control entry index.
• owner—Entry owner.
• status—Entry status:
VALID—The entry is valid.
UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All history control entries created
from the CLI are valid by default.
The display rmon history command can display invalid entries, but the
display current-configuration and display this commands do not display
their settings.
Sampled interface.
Sampling interval in seconds.
201
: 5869
: 9
: 0
: 0
: 0