Display Poe-Profile - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

--- On State Ports: 0; Used: 0.0(W); Remaining: 180.0(W)
Table 29 Command output
Field
Interface
Current
Peak
Max
PD Description
Ports On
Used
Remaining

display poe-profile

Use display poe-profile to display information about the PoE profile.
Syntax
display poe-profile [ index index | name profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
index index: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15 characters.
Usage guidelines
If you do not specify a profile, the command displays information about all PoE profiles.
Examples
# Display information about all PoE profiles.
<Sysname> display poe-profile
PoE Profile
forIPphone
forAP
--- Total PoE profiles: 2, total ports: 6
# Display information about the PoE profile with index number 1.
<Sysname> display poe-profile index 1
Description
Interface name of a PI.
Current power of a PI.
Peak power of a PI.
Maximum power of a PI.
Type and location description for the PD connected with a PI.
Number of PIs that are supplying power.
Power consumed by all PIs.
Remaining power on the PSE.
Index ApplyNum Interfaces
1 4
2 2
Configuration
GE1/0/1 poe enable
GE1/0/2 poe priority critical
GE1/0/3
GE1/0/4
GE1/0/5 poe enable
GE1/0/6 poe max-power 14000
---
143
---