Cwmp Acs Url - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Default
No password is configured for authentication to the preferred ACS URL.
Views
CWMP view
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 255 characters. Its
encrypted form is a case-sensitive string of 33 to 373 characters.
Usage guidelines
You can configure only one password for authentication to the preferred ACS URL. If you execute
this command multiple times, the most recent configuration takes effect.
For a successful connection, make sure the CPE has the same username and password settings as
the ACS.
You do not need to configure this command if the default ACS URL does not require a password for
authentication.
Examples
# Configure the password used for authentication to the preferred ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs password simple newpsw
Related commands

cwmp acs url

cwmp acs username
cwmp acs url
Use cwmp acs url to specify a preferred ACS URL.
Use undo cwmp acs url to restore the default.
Syntax
cwmp acs url url
undo cwmp acs url
Default
No preferred ACS URL is specified.
Views
CWMP view
Predefined user roles
network-admin
226