Display Process Log - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Table 68 Command output
Field
CPU utilization in 5 secs: 16.8%;
1 min: 4.7%; 5 mins: 4.7%
JID
5Sec
1Min
5Min
Name

display process log

Use display process log to display log information for all user processes.
Syntax
display process log [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device.
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display log information for all user processes.
<Sysname> display process log
Process
knotify
knotify
automount
knotify
comsh
knotify
autocfgd
pkg_update
Table 69 Command output
Field
Process
JobID
Description
System CPU usage within the last 5 seconds, 1 minute, and 5 minutes.
Job ID of a process. It never changes.
CPU usage of the process within the last 5 seconds.
CPU usage of the process within the last minute.
CPU usage of the process within the last 5 minutes.
Name of the process. If square brackets ([ ]) exist in a process name, the
process is a kernel thread.
JobID PID Abort Core Exit Kill StartTime
92 92 N
93 93 N
94 94 N
111 111 N
121 121 N
152 152 N
155 155 N
122 122 N
Description
Name of a user process.
Job ID of a user process.
N 0 36 12-17 07:10:27 12-17 07:10:27
N 0 -- 12-17 07:10:27 12-17 07:10:27
N 0 -- 12-17 07:10:27 12-17 07:10:28
N 0 -- 12-17 07:10:28 12-17 07:10:28
N 0 -- 12-17 07:10:30 12-17 07:10:30
N 0 -- 12-17 07:10:31 12-17 07:10:31
N 0 -- 12-17 07:10:31 12-17 07:10:31
N 0 -- 12-17 07:10:30 12-17 07:10:31
283
EndTime