Display Ntp-Service Status - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Field
Peer mode
peer poll interval
Offset
roundtrip delay
dispersion
Root roundtrip delay
root dispersion
Reachabilities
sync distance
Precision
version
source interface
Reftime
Orgtime
Rcvtime
Xmttime
Filter order
Reference clock status
Total sessions

display ntp-service status

Use display ntp-service status to display NTP service status.
Description
Operation mode of the peer device:
• unspec—The mode is unspecified.
• active—Active mode.
• passive—Passive mode.
• client—Client mode.
• server—Server mode.
• broadcast—Broadcast or multicast server mode.
• bclient—Broadcast or multicast client mode.
Polling interval of the peer device, in seconds. The value
displayed is a power of 2. For example, if the displayed value is 6,
the poll interval of the local device is 2
Offset of the system clock relative to the reference clock, in
milliseconds.
Roundtrip delay from the local device to the NTP server, in
milliseconds.
Maximum error of the system clock relative to the reference clock.
Roundtrip delay from the local device to the primary reference
source, in milliseconds.
Maximum error of the system clock relative to the primary
reference clock, in milliseconds.
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
Synchronization distance relative to the upper-level clock, in
seconds, and calculated from dispersion and roundtrip delay
values.
Accuracy of the system clock.
NTP version in the range of 1 to 4.
Source interface.
If the source interface is not specified, this field is Not specified.
Reference timestamp in the NTP message.
Originate timestamp in the NTP message.
Receive timestamp in the NTP message.
Transmit timestamp in the NTP message.
Sample information order.
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock
as a reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as
working abnormally.
Total number of associations.
98
6
, or 64 seconds.