Destination Host; Destination Ip - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

destination host

Use destination host to configure the destination host name for the operation.
Use undo destination host to restore the default.
Syntax
destination host host-name
undo destination host
Default
No destination host name is configured for the operation.
Views
UDP tracert operation view
Predefined user roles
network-admin
Parameters
host-name: Specifies the destination host name, a case-sensitive string of 1 to 254 characters. The
host name can contain letters, digits, hyphens (-), underscores (_), and dots (.), but consecutive dots
(.) are not allowed. If the host name is a series of dot-separated labels, each label can contain a
maximum of 63 characters.
Examples
# Specify www.test.com as the destination host name for the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] destination host www.test.com

destination ip

Use destination ip to configure the destination IPv4 address for the operation.
Use undo destination ip to restore the default.
Syntax
destination ip ip-address
undo destination ip
Default
No destination IPv4 address is configured for an operation.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
ICMP jitter/path jitter/UDP jitter/voice operation view
DNS/ICMP/SSL/TCP/TCP half open/UDP template view
15