Netconf Commands; Netconf Idle-Timeout - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

NETCONF commands

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.

netconf idle-timeout

Use netconf idle-timeout to set the NETCONF session idle timeout time.
Use undo netconf idle-timeout to restore the default.
Syntax
netconf { soap | agent } idle-timeout minute
undo netconf { soap | agent } idle-timeout
Default
The NETCONF session idle timeout time is 10 minutes for NETCONF over SOAP over HTTP
sessions and NETCONF over SOAP over HTTPS sessions.
The NETCONF session idle timeout time is 0 minutes for NETCONF over SSH sessions, NETCONF
over Telnet sessions, and NETCONF over console sessions. The sessions never time out.
Views
System view
Predefined user roles
network-admin
Parameters
soap: Specifies the NETCONF over SOAP over HTTP sessions and NETCONF over SOAP over
HTTPS sessions.
agent: Specifies the NETCONF over SSH sessions, NETCONF over Telnet sessions, and
NETCONF over console sessions.
minute: Specifies the NETCONF session idle timeout time in minutes. The value range is as follows:
• 1 to 999 for NETCONF over SOAP over HTTP sessions and NETCONF over SOAP over
HTTPS sessions.
• 0 to 999 for NETCONF over SSH sessions, NETCONF over Telnet sessions, and NETCONF
over console sessions. To disable the timeout feature, set this argument to 0.
Usage guidelines
If no NETCONF packets are exchanged on a NETCONF session within the NETCONF session idle
timeout time, the device tears down the session.
Examples
# Set the NETCONF session idle timeout time to 20 minutes for NETCONF over SOAP over HTTP
sessions and NETCONF over SOAP over HTTPS sessions.
<Sysname> system-view
[Sysname] netconf soap idle-timeout 20
213