Info-Center Diagnostic-Logfile Directory; Info-Center Diagnostic-Logfile Enable - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

undo enable log updown
Default
All interfaces are allowed to generate link up and link down logs.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable GigabitEthernet 1/0/1 from generating link up or link down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] undo enable log updown

info-center diagnostic-logfile directory

Use info-center diagnostic-logfile directory to configure the directory to save the diagnostic log
file.
Syntax
info-center diagnostic-logfile directory dir-name
Default
The diagnostic log file directory is flash:/diagfile.
Views
System view
Predefined user roles
network-admin
Parameters
dir-name: Specifies a directory by its name, a string of 1 to 64 characters.
Usage guidelines
The specified directory must have been created.
This command cannot survive an IRF reboot or a master/subordinate switchover.
Examples
# Set the diagnostic log file directory to flash:/test.
<Sysname> mkdir test
Creating directory flash:/test... Done.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile directory flash:/test

info-center diagnostic-logfile enable

Use info-center diagnostic-logfile enable to enable saving diagnostic logs to the diagnostic log
file.
Use undo info-center diagnostic-logfile enable to disable saving diagnostic logs to the diagnostic
log file.
332