Cwmp Acs Username - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Hide thumbs Also See for FlexNetwork 5130 HI Series:
Table of Contents

Advertisement

Parameters
url: Specifies the preferred ACS URL, a string of 8 to 255 characters. The URL must use the
http://host[:port]/path or https://host[:port]/path format.
Usage guidelines
The device supports only one preferred ACS URL. If you execute this command multiple times, the
most recent configuration takes effect.
The preferred ACS URL is configurable from the CPE's CLI, the DHCP server, and the ACS. The
CLI- and ACS-assigned URLs have higher priority than the DHCP-assigned URL. The CLI- and
ACS-assigned URLs overwrite each other.
The CPE uses the default ACS attributes for connection establishment only when it is not assigned a
preferred ACS URL from the CLI, ACS, or DHCP server.
Examples
# Specify the ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs url http://www.acs.com:80/acs

cwmp acs username

Use cwmp acs username to configure the username for authentication to the preferred ACS URL.
Use undo cwmp acs username to restore the default.
Syntax
cwmp acs username username
undo cwmp acs username
Default
No username is configured for authentication to the preferred ACS URL.
Views
CWMP view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 255 characters.
Usage guidelines
You can configure only one username for authentication to the preferred ACS URL. If you execute
this command multiple times, the most recent configuration takes effect.
For a successful connection, make sure the CPE has the same username and password settings as
the ACS.
Examples
# Configure the username used for authentication to the preferred ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs username newname
227

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents