Nqa Template - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

You cannot enter the operation view or operation type view of a scheduled NQA operation.
Specify a lifetime long enough for an operation to complete.
Examples
# Schedule the operation with administrator name admin and operation tag test to start on 08:08:08
2008/08/08 and last 1000 seconds.
<Sysname> system-view
[Sysname] nqa schedule admin test start-time 08:08:08 2008/08/08 lifetime 1000 recurring
Related commands
destination ip
display clock (Fundamentals Command Reference)
nqa entry
type

nqa template

Use nqa template to create an NQA template and enter its view, or enter the view of an existing NQA
template.
Use undo nqa template to remove an NQA template.
Syntax
nqa template { dns | ftp | http | https | icmp | ssl | tcp | tcphalfopen | udp } name
undo nqa template { dns | ftp | http | https | icmp | ssl | tcp | tcphalfopen | udp } name
Default
No NQA templates exist.
Views
System view
Predefined user roles
network-admin
Parameters
dns: Specifies the DNS template.
ftp: Specifies the FTP template.
http: Specifies the HTTP template.
https: Specifies the HTTPS template.
icmp: Specifies the ICMP template.
ssl: Specifies the SSL template.
tcp: Specifies the TCP template.
tcphalfopen: Specifies the TCP half open template.
udp: Specifies the UDP template.
name: Specifies the name of the NQA template, a case-insensitive string of 1 to 32 characters.
Examples
# Create an ICMP template named icmptplt, and enter its view.
<Sysname> system-view
50