HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference page 327

dscp dscp-value: Specifies the DSCP value for the mirrored packets. The dscp-value argument can
be a number in the range of 0 to 63 or a keyword in
Table 77 DSCP keywords and values
Keyword
af11
af12
af13
af21
af22
af23
af31
af32
af33
af41
af42
af43
cs1
cs2
cs3
cs4
cs5
cs6
cs7
default
ef
vrf-instance vrf-instance-name: Specifies an MPLS L3VPN instance for mirrored packets sent to
the interface. The vrf-instance-name argument represents the VPN instance name, a case-sensitive
string of 1 to 31 characters. This option is not supported in the current software version.
Usage guidelines
You can execute this command multiple times for a traffic behavior to mirror traffic to different
interfaces.
You can mirror traffic to a maximum of four Ethernet interfaces or Layer 2 aggregate interfaces. If you
execute this command for a traffic behavior multiple times, only the first four configured interfaces
take effect.
Examples
# Create traffic behavior 1 and configure the action of mirroring traffic to GigabitEthernet 1/0/1 for the
traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior 1
[Sysname-behavior-1] mirror-to interface gigabitethernet 1/0/1
Table
DSCP value in binary
001010
001100
001110
010010
010100
010110
011010
011100
011110
100010
100100
100110
001000
010000
011000
100000
101000
110000
111000
000000
101110
318
77.
DSCP value in decimal
10
12
14
18
20
22
26
28
30
34
36
38
8
16
24
32
40
48
56
0
46