Display Info-Center - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Examples
# Display the diagnostic log file configuration.
<Sysname> display diagnostic-logfile summary
Diagnostic log file: Enabled.
Diagnostic log file size quota: 10 MB
Diagnostic log file directory: flash:/diagfile
Writing frequency: 24 hour 0 min 0 sec
Table 79 Command output
Field
Diagnostic log file
Diagnostic log file size quota
Log file directory
Writing frequency

display info-center

Use display info-center to display information center configuration.
Syntax
display info-center
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information center configuration.
<Sysname> display info-center
Information Center: Enabled
Console: Enabled
Monitor: Enabled
Log host: Enabled
192.168.0.1,
port number: 5000, host facility: local7
Log buffer: Enabled
Max buffer size 1024, current buffer size 512,
Current messages 0, dropped messages 0, overwritten messages 0
Log file: Enabled
Security log file: Enabled
Information timestamp format:
Description
Status of the diagnostic log file:
• Enabled—Diagnostic logs can be output to the diagnostic
log file.
• Disabled—Diagnostic logs cannot be output to the
diagnostic log file.
Maximum size for the diagnostic log file, in MB.
Directory where the diagnostic log file is saved.
Interval at which the system saves diagnostic logs from the
buffer to the diagnostic log file.
327