HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference page 102

Field
Reference clock ID
VPN instance
Local mode
local poll interval
peer mode
peer poll interval
Offset
roundtrip delay
dispersion
Root roundtrip delay
root dispersion
Reachabilities
Description
• If the reference clock is the local clock, the value of this field
is related to the value of the Clock stratum field:
When the value of the Clock stratum field is 0 or 1, this
field displays LOCL.
When the Clock stratum field has another value, this field
displays the MD5 digest value of the first 32 bits of the
IPv6 address. The MD5 digest value is in dotted decimal
format.
• If the reference clock is the clock of another device on the
network, this field displays the MD5 digest value of the first
32 bits of the IPv6 address. The MD5 digest value is in
dotted decimal format. If this field displays INIT, the local
device has not established a connection with the NTP server.
VPN instance of the NTP server. If the NTP server is in a public
network, this field displays Not specified.
This field is not supported in the current software version.
Operation mode of the local device:
• unspec—The mode is unspecified.
• sym_active—Active mode.
• sym_passive—Passive mode.
• client—Client mode.
• server—Server mode.
• broadcast—Broadcast or multicast server mode.
• bclient—Broadcast or multicast client mode.
Polling interval for the local device, in seconds. The value
displayed is a power of 2. For example, if the displayed value is 6,
the poll interval of the local device is 2
Operation mode of the peer device:
• unspec—The mode is unspecified.
• sym_active—Active mode.
• sym_passive—Passive mode.
• client—Client mode.
• server—Server mode.
• broadcast—Broadcast or multicast server mode.
• bclient—Broadcast or multicast client mode.
Polling interval for the peer device, in seconds. The value
displayed is a power of 2. For example, if the displayed value is 6,
the polling interval of the local device is 2
Offset of the system clock relative to the reference clock, in
milliseconds.
Roundtrip delay from the local device to the clock source, in
milliseconds.
Maximum error of the system clock relative to the reference clock.
Roundtrip delay from the local device to the primary reference
source, in milliseconds.
Maximum error of the system clock relative to the primary
reference clock, in milliseconds.
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
93
6
, or 64 seconds.
6
, or 64 seconds.