Nqa Server Udp-Echo - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Examples
# Configure a TCP listening service to enable the NQA server to listen to port 9000 on the IP address
169.254.10.2.
<Sysname> system-view
[Sysname] nqa server tcp-connect 169.254.10.2 9000
Related commands
display nqa server
nqa server enable

nqa server udp-echo

Use nqa server udp-echo to configure a UDP listening service to enable the NQA server to listen to
a port on an IP address.
Use undo nqa server udp-echo to remove the UDP listening service created.
Syntax
nqa server udp-echo ip-address port-number [ tos tos ]
undo nqa server udp-echo ip-address port-number
Default
No UDP listening services exist.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address for the UDP listening service.
port-number: Specifies the port number for the UDP listening service, in the range of 1 to 65535.
tos tos: Specifies the ToS value in the IP header for reply packets. The value range for this argument
is 0 to 255, and the default value is 0.
Usage guidelines
Use this command on the NQA server only for the UDP jitter, UDP echo, and voice operations.
When you configure the IP address and port number for a UDP listening service on the NQA server,
follow these restrictions and guidelines:
• The IP address and port number must be unique on the NQA server and match the
configuration on the NQA client.
• The IP address must be the address of an interface on the NQA server.
• To ensure successful NQA operations and avoid affecting existing services, do not configure
the UDP listening service on well-known ports from 1 to 1023.
Examples
# Configure a UDP listening service to enable the NQA server to listen to port 9000 on the IP address
169.254.10.2.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000
88