network-operator
Parameters
pse-id: Specifies a PSE by its ID. If you do not specify a PSE, this command displays detailed PSE
information about all PSEs.
Examples
# Display detailed PSE information.
<Sysname> display poe pse
PSE ID
Slot No.
SSlot No.
PSE Model
PSE Status
Power Priority
Current Power
Average Power
Peak Power
Max Power
Remaining Guaranteed Power
PSE CPLD Version
PSE Software Version
PSE Hardware Version
Legacy PD Detection
Power Utilization Threshold
PD Power Policy
PD Disconnect-Detection Mode
Table 27 Command output
Field
PSE ID
Slot No.
SSlot No.
PSE Status
Power Priority
Current Power
Average Power
Peak Power
Max Power
Remaining Guaranteed Power
PSE CPLD Version
: 4
: 1
: 0
: LSP6POEB
: Enabled
: Low
: 0.0
W
: 0.0
W
: 0.0
W
: 180.0
W
: 180.0
W
: -
: 140
: 57633
: Disabled
: 80
: Disabled
: DC
Description
ID of the PSE.
Slot number of the PSE.
Sublsot number of the PSE.
PoE status of the PSE:
•
Enabled.
•
Disabled.
Power priority of the PSE.
Current power of the PSE.
Average power of the PSE.
Peak power of the PSE.
Maximum power of the PSE.
Remaining guaranteed power of the PSE = Maximum guaranteed
power of the PSE – Total maximum power of all critical PIs of the PSE.
PSE CPLD version number.
138