HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference page 257

Table 58 Monitored objects
Monitored traffic
statistic
input-drops
input-errors
output-drops
output-errors
rcv-bps
rcv-broadcasts
rcv-pps
tx-bps
tx-pps
Table 59 Comparison operators
Comparison operator
eq
ge
gt
le
lt
ne
Usage guidelines
Use interface event monitor policies to monitor traffic statistics on an interface.
You can configure only one event for a monitor policy. If the monitor policy already contains an event,
the new event replaces the old event.
EAA executes an interface event policy when the monitored interface traffic statistic crosses the start
threshold in the following situations:
• The statistic crosses the start threshold for the first time.
• The statistic crosses the start threshold each time after it crosses the restart threshold.
The following is the interface event monitor process of EAA:
Compares the traffic statistic sample with the start threshold at sampling intervals until the start
1.
threshold is crossed.
Executes the policy.
2.
Compares the traffic statistic sample with the restart threshold at sampling intervals until the
3.
restart threshold is crossed.
Compares the traffic statistic sample with the start threshold at sampling intervals until the start
4.
threshold is crossed.
Executes the policy again.
5.
This process cycles for the monitor policy to be executed and re-executed.
Description
Number of discarded incoming packets.
Number of incoming error packets.
Number of discarded outgoing packets.
Number of outgoing error packets.
Receive rate, in bps.
Number of incoming broadcasts.
Receive rate, in packets per second.
Transmit rate, in bps.
Transmit rate, in packets per second.
Description
Equal to.
Greater than or equal to.
Greater than.
Less than or equal to.
Less than.
Not equal to.
248