Table 19: Auto Provision Settings; Figure 21: Auto Provision Settings - Grandstream Networks UCM6108 User Manual

http://arttel.ru
Enable Zero Config
Automatically Assign Extension
Start Extension
Enable Pick Extension
Extension Segment
Generate Random Password
Default Password
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

Figure 21: Auto Provision Settings

Table 19: Auto Provision Settings

Enable or disable the zero config feature on the PBX. The default setting
is disabled.
If enabled, when the device is discovered, the PBX will automatically
assign an extension to the device. The default setting is disabled.
Specify the starting extension to be created/assigned. If the extension is
assigned to existing device already, this extension will be skipped and
the next available extension will be used. The default setting is 6000.
If enabled, the extension list will be sent out to the device after receiving
the device's request. The default setting is disabled.
Specify the extension list to be sent to the device. The default range is
5900 to 6000.
If enabled, random password will be generated for the extension when
it's created. Otherwise, default password will be used. The default
setting is enabled.
Specify default password for the extension if no random password is
generated. The default setting is "admin".
UCM6100 Series IP PBX User Manual Page 49 of 159