Table 19: Auto Provision Settings; Figure 18: Auto Provision Settings - Grandstream Networks UCM6102 User Manual

To start the auto provisioning process, under Web GUI->PBX->Basic/Call Routes->Zero Config, click on
"Auto Provision Settings" and fill in the auto provision information.
Enable Zero Config
Automatically Assign Extension
Starting Extension
Generate Random Password
Default Password
Click on "Save" and then reboot the phones to have the discovery and provisioning process started.
Firmware Version 1.0.1.22

Figure 18: Auto Provision Settings

Table 19: Auto Provision Settings

Enable or disable the zero config feature on the PBX. The default setting
is disabled.
If enabled, when the device is discovered, the PBX will automatically
assign an extension to the device. The default setting is disabled.
Specify the starting extension to be created/assigned. If the extension is
assigned to existing device already, this extension will be skipped and
the next available extension will be used. The default setting is 6000.
If enabled, random password will be generated for the extension when
it's created. Otherwise, default password will be used.
Specify default password for the extension if no random password is
generated. The default setting is "admin".
UCM6102/6104/6108/6116 USER MANUAL Page 43 of 138