http://arttel.ru
Protocol Type
Port
Once the change is saved, the web page will be redirected to the login page using the new URL. Enter the
username and password to login again.
EMAIL SETTINGS
The Email application on the UCM6100 can be used to send out Emails to users with Fax (e.g.,
Fax-To-Email), Voicemail (Voicemail-To-Email) and other information as attachment. The configuration
parameters can be accessed via Web GUI->Settings->Email Settings.
TLS Enable
Type
Domain
Display Name
Sender
The following figure shows a sample Email settings on the UCM6100 assuming the Email is using
smtp.gmail.com as the SMTP server.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
Select HTTP or HTTPS. The default setting is "HTTPS".
Specify port number to access the HTTP server. The default port
number is 8089.
Table 17: Email Settings
Enable or disable TLS during transferring/submitting your Email to other
SMTP server. The default setting is "Yes".
Select Email type.
MTA: Mail Transfer Agent. The Email will be sent from the
x
configured domain. When MTA is selected, there is no need to set
up SMTP server for it or no user login is required. However, the
Emails sent from MTA might be considered as spam by the target
SMTP server.
Client: Submit Emails to the SMTP server. A SMTP server is
x
required and users need login with correct credentials.
Specify the domain name to be used in the Email.
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example, pbx@example.mycompany.com.
UCM6100 Series IP PBX User Manual
Page 43 of 159