Time Settings; Table 15: Auto Time Updating; Figure 14: Ucm6510 Email Settings: Send Test Email - Grandstream Networks UCM6510 User Manual

TIME SETTINGS

The current system time on the UCM6510 is displayed on the upper right of the web page. It can also be
found under web GUI->Status->System Status->General.
To configure the UCM6510 to update time automatically, go to web GUI->Settings->Time Settings-> Auto
Time Updating.
Remote NTP Server
Enable DHCP Option 2
Enable DHCP Option 42
Time Zone
Firmware Version 1.0.0.5

Figure 14: UCM6510 Email Settings: Send Test Email

Table 15: Auto Time Updating

Specify the URL or IP address of the NTP server for the UCM6510 to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
If set to "Yes", the UCM6510 is allowed to get provisioned for Time Zone
from DHCP Option 2 in the local server automatically. The default
setting is "Yes".
If set to "Yes", the UCM6510 is allowed to get provisioned for NTP
Server from DHCP Option 42 in the local server automatically. This will
override the manually configured NTP Server. The default setting is
"Yes".
Select the proper time zone option so the UCM6510 can display correct
UCM6510 IP PBX User Manual Page 42 of 192