Starting An Alarm; Manually Stopping An Alarm; Displaying An Alarm Log - AEMC 8335 User Manual

2. With the start field highlighted in yellow, press
3. Use the ▲ and ▼ buttons to increase or decrease the value. Use the ◄ and
► buttons to move to the next parameter.
4. When completed, confirm the Start alarm schedule with
5. Use the ▼ button to set the Stop alarm settings, then repeat the previous
steps.

6.3.2 Starting an Alarm

1. Press the OK icon's yellow button to launch the alarm campaign between the
start and end times that you specified.
2. The OK icon disappears and the
3. The Campaign on standby message is displayed while awaiting start time and
the icon blinks on the screen's top display bar.
4. The Campaign running message is displayed when start time begins.
5. The Detection Schedule screen with the OK icon (bottom right-hand side of
the screen) are displayed when the end time is reached. You can then pro-
gram a new alarm campaign.

6.3.3 Manually Stopping an Alarm

An alarm can be manually stopped by pressing the
OK icon will reappear in the same location.

6.3.4 Displaying an Alarm Log

Press the icon's yellow button to view the alarm log. The log can contain a
maximum of 14,336 alarms.
The type of connection selected in the configuration mode
not affect the possibilities of alarm filter choice and monitored parameter.
Users are responsible for these choices.
Power Quality Analyzer Model 8335
to enter the date and time.
icon appears instead.
icon's yellow button. The
.
does
63