Removal Of Collimator Cover; Removal Of Lamp Holder - Siemens MAMMOMAT 3000 Modular Modification Instructions

Disassembly

Removal of collimator cover

Fig 2.1
1.
2.
3.
NOTICE
4.

Removal of lamp holder

Fig 2.2
1.
NOTICE
Siemens-Elema AB
Solna, Sweden
Switch off the MAMMOMAT 3000 Modular.
Remove the swivel-arm covers.
Remove the collimator cover (1) by unscrewing four Allen screws (2).
Do not remove any other Allen screws than shown in figure 2.1.
Strap the collimator cover to the stand.
3
4
Remove the lamp holder (4) by unscrewing the two Allen screws (3).
Be careful with the filter assembly.
Register 5
2
1
3
SPB7-230.092.11
Rev. 01 04.98
2
2
Page 1 of 4 MAMMOMAT 3000 Modular
SPS-UD
2 - 1
2
2
Service