Registering A New Patient; Calling Up The Patient Registration Window - Siemens ARCADIS Varic Operator's Manual

Patient data
Registering
Preregistration
8
of 60

Registering a new patient

If a patient has never been examined in your hospital or practice before, no data
about this patient will be stored on your system.
Therefore all the data of this patient must be entered before an examination.
If you register a patient and want to examine this patient immediately afterwards,
enter all the examination-relevant data into the corresponding input fields.
If you only want to preregister the patient for later examination, you must fill in at
least the mandatory input fields. These are emphasized by bold letters (sex,
name, patient ID and date of birth).

Calling up the Patient Registration window

The data of a new patient are entered into the empty Patient Registration win-
dow.
You can call up patient registration from the Patient menu, via icon buttons on
the Viewing task card as well as from the Patient Browser.
Press the key on the symbol keypad.
Or
Click the corresponding button on the Viewing task card/Patient subtask
card or in the tool bar of the Patient Browser.
Or
Select Patient > Register.
– The Patient Registration window opens.
If you call up patient registration from the Patient Browser make sure that you
have not selected a patient or study there. Otherwise the selected data are trans-
ferred to the Patient Registration window.
Operator Manual
SPR2-310.620.30.02.02
0
0