Board D4, Power Supply, Respiratory And Ecg Triggering - Siemens LITHOSTAR Multiline Manual

PC Board Replacement
Supply voltage of the collimator
Supply voltage of the large drives (K1/K2 are energized)
Supply voltage of the small drives (K3 is energized)
Supply voltage of the Com controller (DUEP)

Board D4, power supply, respiratory and ECG triggering

84 37 337 K2013,
•
Check fuses F1 and F2.
•
Measure the operating voltage (place the board on the extension)
+ 12 V ± 10%
- 12 V ± 10%
GND
Siemens AG
Medical Solutions
MP X2.1
Gnd X2.2
MP X4.4
Gnd X4.2
MP X15
Gnd X14
MP X17
Gnd X16
MP X2.9
Gnd X2.6
(X1.d/b/z4)
(X1.d/b/z4)
(X1.d/b/z4)
RXL2-120.841.02.01.02
09.05
+8.5 to +9.5 V regulated
+27 V to +35 V
+28 V to +35 V
+28 V to +35 V
+14 V to +15.5 V regulated
wiring diagram J 1042-44
LED V4
LED V11
Page 27 of 72
CS PS 24
LED V13
LED V14
LED V15
LED V16
The - 5V are not used in the
LITHOSTAR Multiline
.
LITHOSTAR Multiline
27
0