34
Option 3D reconstruction, trace file, and event log file
Saving trace files
NOTE
Insert an empty formatted floppy disk in drive A of the syngo PC.
In syngo, select the "local service" menu and enter the service key.
Activate the button "Copy Trace to Drive A"
All available trace files are copied onto the floppy disk as a Zip file.
Fig. 9:
NOTE
Saving current trace files directly after display of an error
Each time the system is switched on a trace file SPETrace_00.TRC is created and writ-
ten and filed under the drive C:\Trace\SPETrace_00.TRC. The current error trace can
be saved via "local service" Utilities, source, "escape to OS".
Insert an empty formatted floppy disk in drive A of the syngo PC.
SIREMOBIL Iso-C
Loading the operating software
When an occurs, the trace is filed with date and time as a Zip
file
in
the
C:\trace\trace_Vxxx_####.zip
In the copying process, all already available older files are
also copied until a floppy disk is full, but the youngest always
first. Vxxx = SW-Version, e.g. VB00A; #### = error number,
e.g. 1136
SPR2-230.840.01.01.02
08.08
operating
system
(Fig. 9 / p.
34).
Page 34 of 148
CS PS SP
4.2
0
on
drive
0
© Siemens, 2008
For internal use only