Pitney Bowes FastPac DI900 Manuallines page 39

DI900/DI950
Scan Codes
Type of Fold/Letter
and Levels
Envelope
Top Address C
Top Address Z
Top Address Single
Top Address Double
Bottom Address Z
Bottom Address Single
Middle Address C
Bottom Address Half
into Bottom Flap
Envelope
Bottom Address C into
Bottom Flap Envelope
Note: "Top" of flats envelope is the end with the flap; "Front" is the side with the flap
crease line.
SV61314 Rev. A
DI900/DI950 Scan Code Concepts • 2
Address Position and Orientation in Windowed Flats Envelope
Ignore (IGN)
This function ignores or skips a mark used by a different manufacturer's ma-
chine and that is not supported by DI900/950 systems. Up to 9 "foreign" codes
that can be skipped in this fashion, but in practice, no more than half the code
should be ignored for reasons of reliability.
Symbologies
OMR only. Barcode setups provide this function in a different manner.
Sense
The sense of the mark is not relevant as both states are ignored.
Dynamic Envelope Selection
Orientation in PreFold
Accumulator
Address down, top trailing
Address up, top leading
Address down, top trailing
Address down, top trailing
Address down, top trailing
Address down, top trailing
Address down, top trailing
Address down, top leading
Address down, top leading
Position and Orientation of
Address in Alternative Flats
Envelope
Top, front side, right-side up
Bottom, back side, inverted
Top, front side, right-side up
Top, front side, right-side up
Bottom, front side, right-side up
Bottom, front side, right-side up
Middle, front side, right-side up
Top, front side, inverted
Top, front side, inverted
2-29