Pitney Bowes FastPac DI900 Manuallines page 130

7 • Inserter Setup
Setting Up
a BCR Scan
Configuration
(continued)
7-18
8. Select "Finished' once you have set all of the necessary options for the
function.
9. Repeat steps 6 to 8 for each additional function on the BCR Scan Configu-
ration Worksheet.
10. Select " Scan Mark" to toggle the appropriate mark orientation (ladder or
picket), as indicated on the BCR Scan Configuration Worksheet.
NOTE: "Picket" orientation is only available when a HCSF is equipped with
moving beam scanner specifi cally to support this option.
12. Select "Finished" on the Create Scan Code screen once you have entered
and set up all of the functions.
SV61314 Rev. A