Divert Feed Functionality Considerations - Pitney Bowes FastPac DI900 Manuallines

Helpful Hints
When Setting
Up Scan
Configurations
SV61314 Rev. A
Divert Sheet Functionality Considerations
Divert sheet functionality allows you to create scanning jobs that will send
sheets to the lower divert area if sets exceed a given sheet count or contain a
specific scan mark.
This feature is implemented in one of two ways:
• Using the Divert Sheets (DVS) scan mark. The Divert Sheet scan mark is
available on systems that have BCR scanning or the Selective Operations
level of OMR scanning enabled. Refer to Chapter 2, Scan Code Concepts
for more information about the various levels of scanning.
• Setting the "Item Overcount Action" to "Divert". Refer to Assigning a Scan
Configuration to an Existing Job in this chapter for more information.
Jobs using the divert sheet functionality will send diverted sets to the lower
divert area. The remaining parts of the mail piece will be processed, inserted
into an outer envelope, and sent to the upper divert area.
NOTE: If the mail piece contains only a single set, which has been diverted, an
empty envelope will be sent to the upper divert area.
Currently, the system can divert up to 25 sheets. If a set contains more than
25 sheets, the system will stop and you will need to manually remove sheets
from the Pre-fold Accumulator and the remainder of the set from the appropri-
ate Sheet Tray.
Divert sheet functionality cannot function with dynamic envelope selection at
this time.
Lower
Divert
Area
Inserter Setup • 7
Upper Divert Area
7-3