Reviewing A Scan Configuration; Viewing The Job List - Pitney Bowes FastPac DI900 Manuallines

7 • Inserter Setup
Reviewing
a Scan
Configuration
Viewing the
Job List
7-22
If necessary, you can view a list of marks associated with the Scan Configura-
tion without entering the Edit mode.
NOTE: This option is only available if the PC Control is set to "No".
1. From the Home screen, select "Menu" then "Tools".
2. Select "Configure System" then "Scan Configuration Setup".
NOTE: If you are not logged in with supervisor or manager access rights, you
will be prompted to enter an access code.
3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/
DOWN arrow keys to select the Scan Configuration you want to review.
5. Select "Review Highlighted Item".
6. The Review Scan Configuration screen displays. The marks associated
with the configuration appear in the Functions list. Use the UP/DOWN ar-
row keys to select the Function you want to review.
7. Select "Finished" once you have reviewed the list.
Allows you to view the jobs associated with the selected Scan Configuration.
NOTE: This option is not available if there are no jobs associated with the se-
lected Scan Confi guration.
1. From the Home screen, select "Menu" then "Tools".
2. Select "Configure System" then "Scan Configuration Setup".
NOTE: If you are not logged in with supervisor or manager access rights, you
will be prompted to enter an access code.
3. Select the appropriate scan type.
4. The Scan Configurations for the selected scan type display. Use the UP/
DOWN arrow keys to select the Scan Configuration with the job list you
want to view.
5. Select "View Job List for Highlighted Item".
6. The View Job List screen displays. Use the UP/DOWN arrow key to scroll
through the job list.
7. Select "Cancel" to return to the Scan Configuration screen.
SV61314 Rev. A