Pitney Bowes FastPac DI900 Manuallines page 125

Setting Up an
OMR Scan
Configuration
(continued)
SV61314 Rev. A
Menu Option
Includes Zero
(Multi-bit only)
LSB
10. Select "Finished' once you have set all of the necessary options for the
function.
11. Repeat steps 8 to 10 for each additional function on the OMR Scan Con-
figuration Worksheet.
12. Select " Scan String" if a special string is present on the OMR Scan Con-
figuration Worksheet.
a. Select "Custom".
b. Enter the special string using the alphanumeric matrix.
c. Select "Finished" when you are done.
13. Select "Finished" on the Create Scan Code screen once you have entered
and set up all of the functions.
Associated Options/Actions
Allows you to specify whether the sequence should include
zero.
Toggles:
• Yes (default), or
• No.
When Yes is selected for the Include Zero option, the
relevant code's binary value would allow zero, which is
represented by no marks being printed within that section of
the code.
When No is selected for the Include Zero, the relevant code
will NOT include zero as a value. Therefore, a mark will
ALWAYS be printed within that section of the code for OMR.
Allows you to specify the least significant bit.
Toggles:
• Last (default, farthest from top of page), or
• First.
When First is selected for the Least Significant Bit option, the
least significant bit is closest to the top of the page.
When Last is selected, the least significant bit is farthest from
the top of the page.
Inserter Setup • 7
7-13