Pitney Bowes FastPac DI900 Manuallines page 120

7 • Inserter Setup
Setting Up an
OMR Scan
Configuration
(continued)
7-8
7. The Add OMR Functions screen dis-
plays. There are two lists available
on the screen: Selected and Avail-
able.
Refer to "Integrity Levels with As-
sociated Scan Code Functionality" in
Chapter 2, Scan Code Concepts for
a description of the function of each
mark..
8. The Create OMR screen displays.
NOTE: Items that can be added appear in the Available list. Items that have
been added appear in the Selected list.
• Use the LEFT/RIGHT arrow keys to move between lists.
• Use the UP/DOWN arrow keys to highlight an item within a list.
a. Highlight the appropriate item in the Available list, then select "Add
Highlighted Item". The item you selected in the Available list will move
to the end of the Selected list.
b. Repeat step a, above, until all necessary items have been added to
the Selected list.
c. Press "Accept" when you are done.
Use the UP/DOWN arrows to highlight an item in the OMR Marks list.
(This list contains items added in step 7.)
Selected and Available Lists
SV61314 Rev. A