Setting Up A New Scan Configuration; Setting Up An Omr Scan Configuration - Pitney Bowes FastPac DI900 Manuallines

Setting Up
a New Scan
Configuration
Setting Up an
OMR Scan
Configuration
✍
TIP: The customer
must provide the
correct OMR func-
tions and their order
to enter a proper scan
definition for their job.
Use the scan code
worksheets (see
Chapter 5, Scan Code
Worksheets) to make
it easier to enter the
scan definition on the
inserter screen.
SV61314 Rev. A
When the job you are running includes scanning, you will need to:
• Have the BCR or OMR Scan Configuration Worksheet or some such list-
ing of the required scan marks.
• Enter the settings into the Configurations screen for each item included in
the job's Scan Configuration.
• Add the Scan Configuration to the job, so the system knows which items
are scanned.
The BCR or OMR Scan Configuration Worksheet is a document prepared by
the system supplier or someone who manages your system. This document
contains information about scan marks for the job that you are running. You
will need to enter this information in the appropriate Configuration screens.
NOTE: Entry of a access code or password from a Supervisor and/or Manager is
required for use of these functions. Refer to Access Rights in Chapter 2 of the Op-
erator Guide for more information about logging in using the two security modes.
To setup an OMR Scan Configuration:
1. From the Home screen, select "Menu" then "Tools".
2. Select "Configure System" then "Scan Configuration Setup".
NOTE: If you are not logged in with supervisor or manager access rights, you
will be prompted to enter an access code.
3. Select "OMR".
4. The Scan Configuration Setup screen displays. Select "Create New Item".
5. Enter the Scan Configuration name using the alphanumeric matrix. Press
"Finished" when you are done.
NOTE: The Scan Confi guration name cannot be longer than 9 characters.
Additionally, all names must be unique across all scan types. That is, an OMR
Scan Confi guration name cannot be the same as a BCR Scan Confi guration
name.
6. The Create OMR screen displays. Select "Add Item".
Inserter Setup • 7
7-7