Safety Precautions; Safety Definition; Warning Symbols; Safety Guidelines - Salicru CV10-002-S2 User Manual

1 Safety Precautions

Please read this manual carefully and follow all safety precautions before moving, installing, operating and
servicing the inverter. If ignored, physical injury or death may occur, or damage may occur to the devices.
If any physical injury or death or damage to the devices occurs for ignoring to the safety precautions in the
manual, our company will not be responsible for any damages and we are not legally bound in any manner.

1.1 Safety definition

Danger:
Warning:
Note:
Qualified electricians:

1.2 Warning symbols

Warnings caution you about conditions which can result in serious injury or death and/or damage to the
equipment, and advice on how to avoid the danger. Following warning symbols are used in this manual:
Symbols
Danger
Warning
Do not
Hot sides
Note

1.3 Safety guidelines

 Only qualified electricians are allowed to operate on the inverter.
 Do not carry out any wiring and inspection or changing components when the power
supply is applied. Ensure all input power supply is disconnected before wiring and
checking and always wait for at least the time designated on the inverter (5 minutes) or
until the DC bus voltage is less than 36V.
 Do not refit the inverter unauthorizedly; otherwise fire, electric shock or other injury may occur.
 The base of the radiator may become hot during running. Do not touch to avoid hurt.
4 - 104
Serious physical injury or even death may occur if not follow relevant requirements
Physical injury or damage to the devices may occur if not follow relevant requirements
Physical hurt may occur if not follow relevant requirements
People working on the device should take part in professional electrical and safety
training, receive the certification and be familiar with all steps and requirements of
installing, commissioning, operating and maintaining the device to avoid any
emergency.
Name
Serious physical injury or even death may
occur if not follow the relative requirements
Danger
Physical injury or damage to the devices may
Warning
occur if not follow the relative requirements
Electrostatic Damage to the PCBA board may occur if not
discharge follow the relative requirements
Sides of the device may become hot. Do not
Hot sides
touch.
Physical hurt may occur if not follow the
Note
relative requirements
Instruction Abbreviation
Note
Safety precautions