Salicru CV10-002-S2 User Manual page 39

Function
Name
code
S1 terminal
P05.14 switching on
delay time
S1 terminal
P05.15 switching off
delay time
S2 terminal
P05.16 switching on
delay time
S2 terminal
P05.17 switching off
delay time
S3 terminal
switching on
P05.18
delay time
S3 terminal
switching off
P05.19
delay time
S4 terminal
switching on
P05.20
delay time
S4 terminal
switching off
P05.21
delay time
S5 terminal
switching on
P05.22
delay time
S5 terminal
P05.23 switching off
delay time
Function Parameters
Detailed instruction of parameters
Note: for the 2-wire running mode, when FWD/REV terminal is
valid, the inverter stops because of the stopping command from
other sources, even the control terminal FWD/REV keeps valid;
the inverter won't work when the stopping command is canceled.
Only when FWD/REV is relaunched, the inverter can start again.
The function code defines the corresponding delay time of
electrical level of the programmable terminals from switching
on to switching off.
Setting range:0.000~50.000s
Default
Modify
value
0.000s ○
0.000s ○
0.000s ○
○
0.000s
0.000s ○
0.000s ○
0.000s ○
○
0.000s
0.000s ○
0.000s ○
39 - 104