Salicru CV10-002-S2 User Manual page 47

Function
Name
code
Current fault
P07.27
type
Previous fault
P07.28
type
Previous 2 fault
P07.29
type
Previous 3 fault
P07.30
type
Previous 4 fault
P07.31
type
Previous 5 fault
P07.32
type
Current fault
P07.33
running frequency
Ramp reference
P07.34 frequency at
current fault
Output voltage
P07.35
at current fault
Output current
P07.36
at current fault
Bus voltage at
P07.37
current fault
Max. temperature
P07.38
at current fault
Function Parameters
Detailed instruction of parameters
0: No fault
4: OC1 (Over-current when acceleration)
5: OC2 (Over-current when deceleration)
6: OC3 (Over-current when constant speed running)
7: OV1 (Over-voltage when acceleration)
8: OV2 (Over-voltage when deceleration)
9: OV3 (Over-voltage when constant speed running)
10: UV (DC bus Under-voltage)
11: OL1 (Motor overload)
12: OL2 (Inverter overload)
15: OH1 (Overheat of the rectifier module)
16: OH2 (Overheat fault of the inverter module)
17: EF (External fault)
18: CE (RS485 communication error)
21: EEP (EEPROM operation fault)
22: PIDE (PID feedback fault)
24: END (Running time arrival)
25: OL3 (Electrical overload)
36: LL (Underload fault)
Default
Modify
value
●
●
●
●
●
●
●
0.00Hz
●
0.00Hz
●
0V
●
0.0A
●
0.0V
●
0.0
47 - 104