Salicru CV10-002-S2 User Manual page 36

Function
Name
code
selection
S3 terminal
P05.03 function
selection
S4 terminal
P05.04 function
selection
S5 terminal
P05.05 function
selection
Polarity
P05.10 selection of the
input terminals
36 - 104
Detailed instruction of parameters
5: Reverse rotation jogging
6: Coast to stop
7: Fault reset
8: Operation pause
9: External fault input
10: Increasing frequency setting (UP)
11: Decreasing frequency setting (DOWN)
12: Cancel the frequency change setting
13: Shift between A setting and B setting
14: Shift between combination setting and A setting
15: Shift between combination setting and B setting
16: Multi-step speed terminal 1
17: Multi-step speed terminal 2
18: Multi-step speed terminal 3
19: Multi- step speed terminal 4
20: Multi- step speed pause
21: ACC/DEC time option 1
25: PID control pause
26: Traverse Pause (stop at the current frequency)
27: Traverse reset (return to the center frequency)
28: Counter reset
30: ACC/DEC prohibition
31: Counter trigger
33: Cancel the frequency change setting temporarily
34: DC brake
36: Shift the command to the keypad
37: Shift the command to the terminals
38: Shift the command to the communication
39 ~ 63: Reserved
The function code is used to set the polarity of the input terminals.
Set the bit to 0, the input terminal is anode.
Set the bit to 1, the input terminal is cathode.
BIT0 BIT1
S1 S2
The setting range:0x000~0x1F
BIT2 BIT3
S3 S4
Default
value
7
0
0
0x000
BIT4
S5
Function Parameters
Modify
◎
◎
◎
○