Salicru CV10-002-S2 User Manual page 45

Function
Name
code
Displayed
P07.06 parameters 2
of running state
The parameter
P07.07 selection of the
stop state
Frequency
P07.08 display
coefficient
Speed display
P07.09
coefficient
Linear speed
P07.10 displayed
coefficient
Function Parameters
Detailed instruction of parameters
BIT10: input terminals state
BIT11: output terminals state
BIT12: torque set value(% on)
BIT13: pulse counter value
BIT14: length value
BIT15: current stage in multi-step speed
Example- Default Value: 0000 0011 1111 1111
0x0000~0xFFFF
BIT0: analog AI1 value (V on)
BIT1: analog AI2 value (V on)
BIT4: motor overload percentage (% on)
BIT5: the inverter overload percentage (% on)
BIT6: ramp frequency given value(Hz on)
BIT7: linear speed
0x0000~0xFFFF
BIT0: set frequency(Hz on, frequency flickering slowly)
BIT1: bus voltage (V on)
BIT2: input terminals state
BIT3: output terminals state
BIT4: PID reference (% flickering)
BIT5: PID feedback value(% on)
BIT7: analog AI1 value (V on)
BIT8: analog AI2 value (V on)
BIT11: current stage in multi-step speed
BIT12: pulse counters
Example- Default Value: 0000 0000 1111 1111
0.01~10.00
Displayed frequency=running frequency* P07.08
0.1~999.9%
Mechanical rotation speed =120*displayed running
frequency×P07.09/motor pole pairs
0.1~999.9%
Linear speed= Mechanical rotation speed×P07.10
Default
Modify
value
0x0000
0x00FF ○
○
1.00
100.0% ○
○
1.0%
45 - 104