Salicru CV10-002-S2 User Manual page 43

Function
Name
code
AO output filter
P06.21
time
User's
P07.00
password
QUICK/JOG
P07.02
function
Function Parameters
Detailed instruction of parameters
Setting range of P06.18 0.00V~10.00V
Setting range of P06.19 P06.17~100.0%
Setting range of P06.20 0.00V~10.00V
Setting range of P06.21 0.000s~10.000s
P07 Group Human-Machine Interface
0~65535
The password protection will be valid when setting any non-zero
number.
00000: Clear the previous user's password, and make the password
protection invalid.
After the user's password becomes valid, if the password is
incorrect, users cannot enter the parameter menu. Only correct
password can make the user check or modify the parameters.
Please remember all users' passwords.
Retreat editing state of the function codes and the password
protection will become valid in 1 minute. If the password is available,
press PRG/ESC to enter into the editing state of the function codes,
and then "0.0.0.0.0" will be displayed. Unless input right password,
the operator can not enter into it. Note: restoring to the default value
can clear the password, please use it with caution.
0: No function
1: Jogging running. Press QUICK/JOG to realize the
jogging running.
2: Shift the display state. Press QUICK/JOG to shift the
displayed function code from right to left, and 》/SHIFT to
shift from left to right
3: Shift between forward rotation and reverse rotation. Press
QUICK/JOG to shift the direction of the frequency commands.
This function is only valid in the keypad commands channels.
Default
Modify
value
0.000s ○
0 ○
1
◎
43 - 104