Salicru CV10-002-S2 User Manual page 34

Function
Name
code
Motor V/F
P04.03 frequency point
1
Motor V/F
P04.04 voltage
point 1
Motor V/F
P04.05 frequency point
2
Motor V/F
P04.06
voltage point 2
Motor V/F
P04.07 frequency point
3
Motor V/F
P04.08
voltage point 3
34 - 104
Detailed instruction of parameters
torque boost is valid, but over this frequency point, the
torque boost is invalid.
The setting range of P04.01:0.0%:(automatic) 0.1%~10.0%
The setting range of P04.02: 0.0%~50.0%
When P04.00 =1, the user can set V/F curve through
P04.03~P04.08.
V/F is generally set according to the load of the motor.
Note: V1＜V2＜V3, f1＜f2＜f3. Too high low frequency
voltage will heat the motor excessively or damage.
Overcurrent stall or overcurrent protection may occur.
The setting range of P04.03: 0.00Hz~P04.05
The setting range of P04.04, P04.06 and P04.08 :
0.0%~110.0% (rated motor voltage)
The setting range of P04.05: P04.03~ P04.07
The setting range of P04.07: P04.05~P02.02 (the rated
frequency of motor)
Default
Modify
value
0.00Hz ○
00.0% ○
00.00Hz ○
00.0% ○
00.00Hz ○
00.0% ○
Function Parameters