Function Parameters; Function Parameters Description - Salicru CV10-002-S2 User Manual

5 Function Parameters

5.1 Function parameters description

The function parameters of CV10 inverters have been divided into 30 groups (P00~P29) according to the
function, of which P18~P28 are reserved. Each function group contains certain function codes applying 3-level
menus. For example, "P08.08" means the eighth function code in the P8 group function, P29 group is factory
reserved, and users are forbidden to access these parameters.
For the convenience of function codes setting, the function group number corresponds to the first level menu,
the function code corresponds to the second level menu and the function code's value corresponds to the third
level menu. CV10 includes the following function groups:

P00: Basic Function Group

P01: Start-up and stop control

P02: Motor data

P04: SVPWM Control

P05: Input Terminals

P06: Output Terminals

P07: Human-mafchine interface

P08: Enhanced Function

P09: PID Control

P10: Multi-step speed control

P11: Protective parameters

P14: Serial communication

P17: Monitoring function
Below is the instruction of the function lists:
The first column "Function code": codes of function parameter group and parameters
The second column "Name": full name of function parameters
The third column "Detailed instruction of parameters": Detailed instruction of the function parameters
The fourth column "Default value": the original factory set value of the function parameter
The fifth column "Modify": the modifying character of function codes (the parameters can be modified or not
and the modifying conditions), below is the instruction:
"○": means the set value of the parameter can be modified on stop and running state；
" ◎ ": means the set value of the parameter can not be modified on the running state；
"●": means the value of the parameter is the real detection value which can not be modified.
22 - 104 Function Parameters