Keypad Operation Procedure - Salicru CV10-002-S2 User Manual

4 Keypad Operation Procedure

The keypad is used to control CV10 inverters, read the state data and adjust parameters.
Note: Fix the external keypad with M3 screws or the installation bracket. The installation bracket is optional.
No. Name
1 State LED
2 Unit LED
18 - 104
Figure 4-1 Keypad
RUN/TUNE
FWD/REV
LOCAL/REMOT
TRIP
Mean the unit displayed currently
Description
LED off means that the inverter is in the stopping state;
LED on means the inverter is in the running state.
FWD/REV LED. LED off means the inverter is in
the forward rotation state; LED on means the
inverter is in the reverse rotation state
LED for keypad operation, terminals operation and remote
communication control. LED off means that the inverter is in
the keypad operation state; LED blinking means the
inverter is in the terminals operation state; LED on means
the inverter is in the remote communication control state.
LED for faults. LED on when the inverter is in the fault
state; LED off in normal state; LED blinking means the
inverter is in the overload pre-alarm state.
Hz
RPM Rotating speed unit
A
%
V
Keypad Operation Procedure
Frequency unit
Current unit
Percentage
Voltage unit