Appendix C Peripherial Options And Parts; Peripherial Wiring - Salicru CV10-002-S2 User Manual

Appendix C Peripherial options and parts

This chapter describes how to select the options and parts of CV10 inverters.
C.1 Peripherial wiring
Below is the peripherial wiring of CV10 inverters.
Name
Circuit breaker + Earth
leakage protection
Input reactor
EMC filter
Braking resistors
Choke
94 - 104
Prevent from electric shock and protect the power supply and the cables system from
overcurrent when short circuits occur. Please select an additional earth leakage protection with
the function of reducing high order harmonic and with the rated sensitive current above 30mA.
This device is used to improve the power factor of the input side of the
inverter and control the higher harmonic current.
Control the electromagnetic interference generated from the inverter. It is
installed in parallel with the input of the inverter, and placed under it
Shorten the DEC time
Prolongues the effective transimitting distance of the inverter because controls the
sudden high voltage provoqued when switchiong on/off the IGBTs of the inverter.
Recommended when the cable distance between the inverter and the motor is
between 50m and 100m. Please install close to the output terminals of the inverter.
Descriptions
Appendix C Peripherial options and parts