Salicru CV10-002-S2 User Manual page 21

2) This function code is not modifiable in running state, but modifiable in stop state.
Example: Set function code P00.01 from 0 to 1.
Figure 4-3 Sketch map of modifying parameters
4.2.2 How to set the password of the inverter
CV10 inverters provide password protection function to users. Set P7.00 to gain the password and the password
protection becomes valid instantly after quitting from the function code editing state. Press PRG/ESC again to the
function code editing state, "0.0.0.0.0" will be displayed. Unless using the correct password, the operators cannot enter it.
Set P7.00 to 0 to cancel password protection function.
The password protection becomes effective instantly after retreating from the function code editing state. Press
PRG/ESC again to the function code editing state, "0.0.0.0.0" will be displayed. Unless using the correct
password, the operators cannot enter it.
Figure 4-4 Sketch map of password setting
4.2.3 How to watch the inverter state through function codes
CV10 inverters provide group P17 as the state inspection group. Users can enter into P17 directly to watch the state.
Figure 4-5 Sketch map of state watching
Keypad Operation Procedure 21 - 104