Accessing Server Components; Prevent Esd Damage - Oracle SPARC T7-1 Service Manual

Accessing Server Components

Caution -
power cords before accessing any cold-serviceable components.
Related Information
"Safety Information" on page 41
■
"Power Off the Server (Oracle ILOM)" on page 48
■
"Power Off the Server (Server Power Button - Graceful)" on page 48
■
"Power Off the Server (Emergency Shutdown)" on page 49
■
"Rear Panel Components (Service)" on page 15
■
Accessing Server Components
These topics explain how to access components on the outside and the inside of the server.
Perform these tasks in this order, as needed.
"Prevent ESD Damage" on page 50
■
"Extend the Server to the Service Position" on page 51
■
"Release the CMA" on page 52
■
"Remove the Server From the Rack" on page 54
■
"Remove the Top Cover" on page 55
■
"Open and Remove the Airflow Cover" on page 56
■
"Remove the Fan Cover" on page 57
■
Related Information
"Safety Information" on page 41
■

Prevent ESD Damage

Many components housed within the chassis can be damaged by ESD. To protect these
components from damage, perform the following steps before opening the chassis for service.
1. Prepare an antistatic surface to set parts on during the removal or installation
process.
50 SPARC T7-1 Server Service Manual • May 2017
Because 3.3V standby power is always present in the server, you must unplug the